Other

  • PORTABLE BEVEL MACHINE Model PBM1

    PBM1

    ● For Pipe & Round Parts
    ● Usable in fixed position for beveling small pieces and portable for beveling large parts.
    ● Beveling of pipe and round parts diameter from 150mm to 3.5m.
    ● Ability of replacing the supports for beveling pipe and round parts.
    ● Fluent movement of machine by roller supports made hardened steel on both side.
    ● Easy adjustment of bevel angle from 15 to 65 degree with max. width of 20 mm.
    ● High quality beveled surface.
    ● Fast and easy replacement of insert without any special adjustment.
    ● Ease of working for beveling large parts during long time because of proper center of mass design.

  • DEBURRING SOLUTION Model PK

    PK

    ● Plastic handle
    ● Deburring plastic and soft metal parts.
    ● The blade is turning 360 so it will be adjusted to the actual deburring angle.
    ● Blade is changeable by turning of the nose part of the handle.
    ● in metale handle type, blade will be replaced by pressure.
    ● All blades’ deburring are in direction of CW (clock wise) exept K43.
    ● K43 blade is used in CW and CCW directions.

  • DEBURRING SOLUTION Model MK

    MK

    ● Metal handle
    ● Deburring plastic and soft metal parts.
    ● The blade is turning 360 so it will be adjusted to the actual deburring angle.
    ● Blade is changeable by turning of the nose part of the handle.
    ● in metale handle type, blade will be replaced by pressure.
    ● All blades’ deburring are in direction of CW (clock wise) exept K43.
    ● K43 blade is used in CW and CCW directions.

  • MINI TYPE DEMAGNETIZER Model MTD

    MTD

    ● Note:
    - After approx, 20-minute continual operation, ok when its temperature rises up to the set temperature, power supply will stop automatically to protect the product. When this happens, wait for 10 minutes or till temperature drops, and then it’ll resume operation automatically.

  • BEEP LIGHT EDGE FINDER Model SK20

    SK20

    ● No need to rotate while measuring.
    ● Accuracy of edge: within 0.01mm.
    ● save time to find positions.
    ● Edge finder by light or beep.
    ● Note:
    - While finding the edge, the spindle should be on complete stop situation.

  • MECHANICAL EDGE FINDER Model SK10

    SK10

    ● Accuracy of zero point to point is within 0.01mm
    ● R.P.M. Within 450-600.

  • LIFTING EYEBOLT Model E205

    E205

    ● DIN 580

  • PORTABLE BEVEL MACHINE Model PBM

    PBM

    ● For Plate & Flat Parts
    ● Usable in fixed position for beveling small pieces and portable for beveling large parts.
    ● Beveling of pipe and round parts diameter from 150mm to 3.5m.
    ● Ability of replacing the supports for beveling pipe and round parts.
    ● Fluent movement of machine by roller supports made hardened steel on both side.
    ● Easy adjustment of bevel angle from 15 to 65 degree with max. width of 20 mm.
    ● High quality beveled surface.
    ● Fast and easy replacement of insert without any special adjustment.
    ● Ease of working for beveling large parts during long time because of proper center of mass design.